Questions & Answers for: snes9x display failure Microwave Ovens

Question about Microwave Ovens

2 Answers

...display after 8-seconds.If the tests are successful, "OK " will be displayed. If one or more of the tests fail, "ERR " will be displayed.. 2.When a keypad is pressed, a number according to the test ...

Question about Spacemaker JVM1640SJ Microwave Oven

1 Answer

Got code PF and control keypads not working? Hello : PF indicates power failure . Displays this message after it has been unplugged or if there has in fact been a power failure . good luck . please ...

Question about Spacemaker JVM1640SJ Microwave Oven

1 Answer

...to be set on the panel or a failure of the display then the touch pad is faulty - faulty membrane switches or a failure of the control unit , possible the power or the processor in the control

Question about Spacemaker JVM1640SJ Microwave Oven

1 Answer

failure codes of H97, H98 and H99. H97, H98 and H99 appears in display window a short time after start key is pressed and there is no microwave oscillation. There is not a lot the layman can do except

Question about Spacemaker JVM1640SJ Microwave Oven

2 Answers

...display after 8-seconds.If the tests are successful, "OK " will be displayed. If one or more of the tests fail, "ERR " will be displayed.. 2.When a keypad is pressed, a number according to the test ...

Question about DMT2420SS Microwave Oven

1 Answer

...and something I can fix? Model DMO 2420R. Thank you. This is a failure in the backlight circuit and/or a display segment failure. Both are regularly repaired with our $39.95 service. Details are

Question about DMT2420SS Microwave Oven

1 Answer

...board, panel display and connectors. Remove the front panel and board and confirm and if so you need to wash the board and reset. Also it can be due to failure of the display or drive from the ...

Question about DMT2420SS Microwave Oven

1 Answer

...display filled with characters, then it completely powered down. I've unplugged it for a half hour and plugged it back in, still wont power back on. Have plugged in another appliance to that power ...

display quit, everything else works. less than 2 years old model WMH32517AT Over the range ovens of all brands are prone to failure of the electronics due to heat and steam from the food that's cooked

display pad. How serious is this? Can this be fixed? Error code H97 is an indication of a possible failure of the Magnetron, DPC board or the High Voltage Inverter board. It could be just a loose wire

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...