Questions & Answers for: Nokia snes9x display failure

Question about 1600 Cellular Phone

1 Answer

...SGH A400 (with double and colour screen) The Display have messege "System failure contact your provider" I stay in Indonesia. Please help for this trouble. Thank's and regard Lanie.AM *2767*3855# ...

SOLVE THIS MY CELL PHONE DISPLAY NOT CDHARGING It is charging problem due to hardware failure. Try to repair it as shown in pic bellow. It will be OK. Thanks to genius Archit for nice pic and share it

Question about N70 Cellular Phone

2 Answers

...problem of your is hardware issue, have your lcd replaced, with a new on, if it doesnt do the job display ic driver failure is the cause, if its driver failure you need a technician to have it ...

Question about 8600 Luna Cellular Phone

1 Answer

failure of the diplay or itt can be possible cconnection of the display to the main board. In both the cases you can suspect the display **** try removing and reseting it this changes you dont have to

Question about 7610

1 Answer

be failure of the display , failure of the hardware in main board. But sometimes reloading software can solve. Just for final word, remove battery and keep aside ffor 30 minutes. then replace and test

Question about 2630 Cell Phone (Unlocked) - Black

1 Answer

...failure of the display unit , it can be failure of the LCD so it is good to confirm the fault with a visit to the Nokia care for estimate as nothing else but a replacement is possible. If however ...

Question about 6233 Cellular Phone

1 Answer

...using Nokia 6233 from past 3 years.Now it is showing a line in display as a "permenant mark".how can i solve this problem This is a display device failure, you need to replace the

Question about 6233 Cellular Phone

1 Answer

my front camera displays hardware failure Hi there. A hardware failure cannot be fixed by a user. You will have to call your carrier and get a warranty repair initiated. Alex

Question about 3110 Cellular Phone

1 Answer

display light no work Possible failure of the back light LED in the panel , it can be due to open circuit in the board due to corrosion , it can be a frack failure or a failure of the LED power. ...

...failure of LCD/LCD socket/ Display IC (filter).So, to solve this you can at least open the case and clean the components/board near the display socket Or Re-insert the LCD.If this trick doesn't ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Nokia Cell Phone Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18343 Answers

IT Solution
IT Solution

Level 3 Expert

805 Answers

Are you a Nokia Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...