Questions & Answers for: slight curve side screen

...screen? If one of the colors is only slightly off, you should be able to correct it with the standard menu. If one or more of the colors has suddenly taken a dramatic shift, and is curved inward at a ...

...screen control, it's sorta like a brightness for each color, and if one color is too high it will produce a thin curved line. The best way I have found to get to the controls is by removing the lower ...

...slight curve on the left hand side that I see sometimes on the screen. Also, how did you get the board out of the TV, on which the IC needs to be changed? Will appreciate your response. Thanks AJ ...

...side). After removing the screws, lift the whole panel and remove it. Be careful not to stretch the cords or break any of them. in the bottom-center you will find the variable resistors, one for each ...

slight drop (curves downward) on the left and right side. It is only about 1/4'' drop on both sides but it is noticiable. Any ideas? Sony KV-36HS420 36-Inch FD Trinitron WEGA Hi-Scan 1080i HD-Ready TV

slight curve to it with the center stretching further upwards on the screen than the sides do. I even have a slight chunk of the upper left hand side of the screen(my left while staring at it) showing

...side of the screen only. The picture is also slightly blury in this area. Straight lines also appear slightly curved in this area (very noticable when the TV guide comes on screen). It is only the ...

slight curves on side of screen You have what is known as a "pincushion correction" problem. There is a circuit in larger sets to correct this curve and when the circuit goes you get curves. Have a ...

...curve slightly up on the left side of screen. Happened very suddenly. Things were perfect Tuesday night turned it on Wednesday morning and problem ocurred. Your convergence is bad and needs fixed. I ...

...curve 8520, the frame seems to be warping on the left side. It's peeling away from the screen, so there is a slight gap between them. It has gradually gotten worse and I'm afraid that the frame will ...