Main/slave selection Master/slave selection 2 ways to select master slave congiration 1. BIOS method. Start ur pc. nter the setup by pressing delete key or any other key as per ur bios.. now c if ...
i have a 91 nissan d21 and cnt find the slave cylinder or master slave cylinder? The master is beside the brake master cylinder, between the brake cylinder and the fender. Follow the line down to the ...
...slave, it could be answered. masters do not have bleed screws, slaves do. slave cylinders at the back wheels have bleeders which are on the inside of the backing plate, slave cylinder in the front ...
Question about Caviar SE WD1600JS (WD1600JS20PK) 160 GB Hard Drive
need jumper settings for slave drive WD1600JS The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 ...
Question about CRW-5232W 52X32X52 IDE CD-ReWriter (Retail) (CRW5332W) Burner
what is the position of the link do I need to change to master/ slave etc The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means Sec ...
Question about Deskstar 7K500 500 GB Hard Drive
is there a slave or master switch on the hard drive want to hook up a external hard drive enclosure The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: ...
Question about Deskstar 7K1000B HDT721050SLA360 500GB 7200rpm SATA300 SATA Hard Drive
[email protected] How do I slave HDT721050SLA360 500GB 7200rpm if you want to set a master / slave on you computer During the boot process you will see on the screen to press a certain key to ...
Question about Deskstar 7K1000B HDT721050SLA360 500GB 7200rpm SATA300 SATA Hard Drive
jumper settings for master drive if its a SATA hard driveyou dont need to set master slave the biggest capacity hard drive will set as master During the boot process you will see on the screen to ...
pins location master slave Need switch from master to slave location During the boot process you will see on the screen to press a certain key to enter setup Press and hold that key during the boot up
Question about Motherboard Gt5408 Gt5438 Gm5407e Gm5442
...clutch operation. This is a clutch master cylinder with a reservoir on the firewall, and a clutch slave cylinder down on the bell housing of the transmission, with a steel tube running from the ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions