Questions & Answers for: skip fire 3

enigne skipping when i frist start my van up it is only fireing on 3-4 plugs ,then after running for 2-3 minutes it will start firing on all cyclinders. i put in new plugs last month. 9-02-08 .so do ...

...stuck on 5-2 on super paper mario i cant find the stone i need for the 3 pillars u need a stone,water nd fire i have found the water nd fire jst cant find the stone anywhere please help me Skip to ...

skipping 360 transplanted and 360 from a 99 dakota r/t into a 98 durango 4x4 and the timing is off. what is the firing order and which way does the distributor rotate. look on top of intake ...

just wanted to know whitch side is no.1 cylinder?? ussually the firing order is left to right and skipping ever other piston. so if it is a 4 cylander it would go 1-3-2-4 from sitting on the bike

...make both cyls not fire i had the same problem with my 03 impala. replaced spark plugs and wires, still continue to skip. turned out there was dirt in it which was causing the cyls to skip, not

my 2005 f150 is skipping and i put plugs in and coils it still reads a code on bank number 3 and skips next step is to check if the fuel injector is operating correctly. Also make sure that the spark ...

miss fire on number 3 plug on a1999 toyota 4 runner 3.4 motor.Have changed plugs,wires,and put a new coil on that plug and it still skips. check compression

...fire, engine skipping, hesitant acceleration, The hesitation,skipping and rough running started suddenly and i took the car to auto parts place to have them check with their "reader". It ...

Need the Fireing Order infomation Have a skip on # 2 The firing order is 1-3-5-4-2, with 1 being in the front of the engine (near the radiator)

...engine. but now i have misfire on cyl #3. i have spark and gas going to each cylinder but it skips on 3 &4. timing is correct, firing order is correct,new plugs, new wires, new cap & rotor , ...