Questions & Answers for: size torx bolts front rotors

...rotor. install the 2 torx bolts, size 40? head I think. You are done. If rotors are scored bad, replace them too. you have two bolts on in side of brake caliper undo the hole claipier should come ...

Ad

...torx bit for your caliper bolt.a size t50 if I am thinking right. use a good one as these can be hard to get broke loose.as far as rotors remove cliper slide bracket with an 18mm two bolts and rotor ...

Ad

Question about 2006 Silverado 1500HD

1 Answer

bolts screw them in there after you remove the torx and it will push the rotor off the hub and the best way to remove the torx is with a impact driver it is like a screw driver you change the bits but

...size hex (?) to remove caliper to get to rotor.... 2005 Ford Escape front brake replacement You need a 7mm socket, which are available at auto parts stores. Is it hex (like an allen screw) or is it a ...

...torx head. I will be needing to put on new pads AND have the rotors ground, so the rotors will need to come off. The front brakes appear to be more normal with a larger pair of metric bolts holding ...

Question about 2003 LeSabre

1 Answer

torx size for 2003 heritage soft tail primary drain plug tran drainplug I think this an Allen bolt instead of Torx, then you have to buy an Allen Tool kit in a Auto shop....

Question about 2005 FLHTCUI Electra Glide Ultra Classic

1 Answer

...nut and front brake caliper bolts 2005 Harley davidson ultra classic caliper torque 28-38 ft lbs,front axle nut torque60-65 ft lbs. front brake rotor torque 16-24 ft lbs. straight from harley

Malibu? Read the thread on how to remove them - just need the size and type of bit to remove them. Putting in seat heaters on my 2003 Malibu, it's a T50 Torx. NAPA had it, am sure others carry it also

Question about 2010 FLHTK Electra Glide Ultra Limited

1 Answer

Torx Bolts below the handle bars on the fairing. Remove each Torx Bolt on the upper part of the fairing. They are located at the bottom outside corner of each speaker. Then remove both wind deflectors

Question about 2005 FLHTCUI Electra Glide Ultra Classic

1 Answer

bolts Per the FLH/FLT Clymer manual on 06-09 model years. Brake disc torx bolts are FRONT WHEEL 16-24 FT.-LB REAR WHEEL 30-45 FT.-LB. I wouldn't think it would change that much year to year on FLHTCUI

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...