Singer 457 Brother Sewing Machine Servicing My Machine- Belt Replacement Lubricating My Sewing Machine check out this thanks. that's a nice machine, one of the last mechanical Elnas with the discs
...thread isn't broken and I have rethreaded the machine according to the instruction manual. Can you offer other suggestions? I had the same problem and it turned out the tension was too tight. I had ...
Singer 7442 stuck/jammed I was sewing sheer curtains and when I was almost done with the project, the sewing machine got all of a sudden slower until it eventually got tuck. When trying to move the ...
Question about 6038 Mechanical Sewing Machine
...Singer 6038 sewing machine The thread holder is broken and I have got a new one. To fix it, I need to open the case and reach the inner side of the body to screw the part. I removed all the screws on ...
thread. My wife has used the machine several times without issue, the last time she broke a needle sewing some denim, we found most of the needle but could not find it all, she tried to get it to pick
...machine pull the thread off the spool because the thread spool does not need to spin. The added pressure of spinning a thread spool contributes to tension issues (especially if you are using large ...
Question about OVERHAULED 401 401A MULTI-STITCH HEAVY DUTY ALL METAL Sewing Machine
...thread. 3.Also since this is an older machine, there may be small nick in the wire from the tension. You can buy a new wire for it or take a small piece of sandpaper and smooth it out. 4.The most ...
Question about Professional 5 14T968DC 5 Thread Serger with Coverstitch with Package Of Six Overlock Feet
...singer, do they exist? How to Thread a Sewing Machine - Instructables www.instructables.com/.../How-to-Thread-a-Sewing-Machin... InstructablesMachine from a flea market or thrift shop with no ...
Question about Professional 5 14T968DC 5 Thread Serger with Coverstitch with Package Of Six Overlock Feet
singer sewing machine 401 replacing singer sewing machine thread spool holder Hi the spool holder on this machine is just a plastic rod with a slight taper and it just pushes into the hole. If the old
Question about Professional 5 14T968DC 5 Thread Serger with Coverstitch with Package Of Six Overlock Feet
...Machine timing. (adjust timing) 13.Hook is worn or damaged (typically not a worn hook unless a few hundred hours of use, look for a barbed or bent hook point) Watch following Singer video... see ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions