Questions & Answers for: singer lock stitch sewing machine

...moving like they should. Usha janome magic stitch removal of right side cover My brother lock 546D has seized what can do My singer touch and sew is stuck can get it to go up and down twice and...

...lock the needle it into position? I am assuming that this is the position that they put it in for shipping but the manual says nothing about it. Turn the big knob on the right of your Singer 1507 ...

SINGER 3116 LOCKS UP It will start to sew, after afew stitches it lockes up. The wheel is hard to turn and the bobbin thread is notted. I just purchased this machine, could it be the timing? if you ...

...lock singer 185j figured out the threading (upper and bobbin) and the motor and crank work, but the stitches don't lock! it looks like it's sewing, but then on closer examination, the ...

...Singer Sewing Machine 5830C has pattern selection on right front, manual does not mention it at all and company does not have any information. On stitch dial there is a red mark, I understand this ...

...singer 2950 sewing machine Threading it several different ways. Top thread does not pick up bobbin thread properly. Does not lock the stitch try this............ ...

...Singer Quantum 9910 is completely locked up.The wheel can't be turn. I was sewing terry cloth fabric, then a needle broke, changed the new needle, was able to sew a few stitches, then it all ...

...singer quantum xl-1. The needle bar won't go down when any of the pictures are selected to sew, duck bear. The letters work and all the straight stitches and zigzags. Any ideas? Hi Karen, Looks like ...

...singer overlocker ?????????????????????? Pull more thread tail through the needles before beginning to serge. Also, if you stitch off the fabric when at the end and then clip through the locked ...

...stitch choice. The zig-zag cover plate is appropriate for most stitches. Four different cover plates are listed in the included accessories on page 3 (page 5 of the PDF) of the manual. Most Singer ...