...Singer-Sewing-Machine-Manual I wanted to turn my daughters old jeans into shorts since they still fit, but were too short. I was having the same problem, but I was able to make some progress. I ...
Question about 7442 Mechanical Sewing Machine
clean out any lint, and oil the machine. This, plus using the right size needle (size 16 or higher) and thread (heavy duty), should do the trick. Let me know if this solves the problem, ok? Good luck
Question about 7442 Mechanical Sewing Machine
singer 4411 heavy duty machine. The problem is, when you press foot pedal, it goes too fast. I tried many times for slow start but don't work. I bought it new from amazon recently. Can anyone help
Question about 4423 Sewing Machine
...Singer Heavy Duty 4423 has a problem getting the bobbin thread to come up I cannot raise the bobbin thread with the machine needle. First make sure the needle is the correct size and fully inserted ...
Question about 4423 Sewing Machine
...Singer sewing machine model 4423 Heavy Duty. I have a problem when I am sewing. The fabric move backward rather than moving towards me when I sew. Please help! Try sitting on the other side of the ...
Question about 4423 Sewing Machine
...singer 4423.CL - heavy duty sewing machine? my machine fell off the taable and now the balance wheel is stuck and won't turn over and raise the needle. How do I go about fixixng the problem? possibly ...
Question about 4423 Heavy Duty Sewing Machine
working good had to rewind bobbin rethreaded machine, problem is machine is running but no needle movement Did you loosen the handwheel to wind the bobbin? If so, it needs to be tightened before the ...
Question about 4411 - Heavy Duty Model Sewing Machine
inner part in the clockwise direction . Based on some review of this machine, this may very likely be a common problem: Amazon com Customer Reviews SINGER 4411 Heavy Duty Extra High Sewing Speed... ..
Question about 4411 - Heavy Duty Model Sewing Machine
Singer Heavy Duty 110 making whining/screeching noise. My wife has had this machine for 7 yrs, no problems. Just started making this noise. I cleaned and oiled the machine, still makes the noise. Any ...
Question about 4411 Heavy Duty Sewing Machine
...Singer 4411 and the feed dogs lower/raise switch appears to be disengaged. Has anyone seen this on the heavy duty models? Best, Jordan Well that can be deceiving, and here's why. Once you lower the ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions