Singer Merritt 4530 and the different stitches are in black or red on the machine. I can set it to the black ones but I can't get it to do the red (fancier zigzag stitch, etc). Is there something that
Question about CE-100 Futura Computerized Sewing Machine
...manual are not working. are there updates to capibilities? As far as I remember there was no function "Flip hor./ver." in Futura 1.0.0.x. You could upgrade your software to version 2.5.0.x which is ...
...sew Look at your manual as to how your thread is coming off of your bobbin, it has to be coming off counterclockwise, if it is coming off clockwise, you are going to have this problem. Flip your ...
Question about 4423 Sewing Machine
Singer 4423 Remove extension table so you can see switch on BACK of machine @ left side. Flip switch to raise feed dogs up. If machine actually sewing in reverse - check n Buttonhole adjustment. Reset
...shows you where to flip the lever to raise the feed dogs. If your feed dogs are not grabbing fabric your feed dogs are lowered. ...
manual, or look around the base of the machine. There is an option to drop the feed dogs. This stops the pulling through action of the machine. You just have to flip a switch. This is normally what is
...flip a lever on the left, and it will start to fill. However, you should download your instruction manual free from the Singer Sewing Machine site; it's pictured and discussed on page 7. A heads up, ...
...singer futura xl-420. When sewing a straight stitch, it will stop sewing and blink error code 6. When I look up in the manual it says that the top thread has broken, however it isn't broken. I've ...
Question about Featherweight 132Q Mechanical Sewing Machine
...singer curvy 8763 sewing machine and it keeps blinking on and off. What did I do wrong? Try unplugging for about 10 minutes and then retry. Try flipping the cord around and plug it in that way. Also ...
Question about Featherweight 132Q Mechanical Sewing Machine
...singer serger Usually, the upper blade flips up and out of the way. Sometimes pushing in on the blade and rotating upwards will work, otherwise the manual should have instructions. HOWEVER, that ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions