Questions & Answers for: singer bobbin thread loose winding

...bobbin I have a brand new Singer 7444 that won't wind the bobbins properly. After winding for a little while, the thread starts wrapping around the shaft under the bobbin. I then stop the process by ...

...Singer 7470 for the first time, and my bobbin thread is bunching terribly. There is a loud sound from the bobbin chamber, as if the mechanism is bouncing around??? How can I fix this bobbin issue? ...

...Singer bobbin winding instructions at http://www.singerco.com/resources/bobbin_wind.html. "Birdnesting" occurs when there is no tension on the needle thread to pull the bobbin thread. This is easily ...

Singer 9410 bobbin problems I have a Singer 9410. When I press the indent on the hand wheel disc; it does not stop the needle from going up and down. Does this affect the way the bobbin winds? The ...

...singer, when this happens, I have the bobbin in wrong and have to rethread. (Turn around), make sure when you put the bobbin in the case, the thread comes off at the left. Also, loose thread will ...

singer 301a sewing machine does not sew for more than 2 secs...top thread just knots into a huge ball on bottom of fabric...everything is threaded correctly and all tension set well...next step is ...

...bobbin for my singer sewing machine but the thread is not tight but is very loose I think that you have wound the bobbin with the thread unwinding the right way. Retry winding again and do not speed, ...

bobbin winder is a handy gadget. It is available for ~$30 from JoAnn's Fabrics, Amazon, etc and is battery or electric compatible. It saves wear and tear on a machine and can wind multiple bobbins one

...singer 1725 The bobbin winder does not wind correctly the thread is not tight on the bobbin it is loose and slightly messy. It does not wind evenly there is always more thread on the bottom. Hai, ...

Singer Quilter Confidence - needle moves when winding bobbin I am pretty positive I have thread the bobbin correctly. When I press the foot petal it winds for a few seconds then an "88" error flashes ...