...sim card holder port .... there will be loose contact inside the sim card holder is not touching the circuit board inside due to this your sim card is getting rejected ... as you have told that the ...
...sim holder or the sim holder is in loose contact ... if you are good at opening the handset then just open it and remove all and clean the sim holder with some alcoholic solvent and refit that ...
...sim holder or the sim holder is in loose contact ... if you are good at opening the handset then just open it and remove all and clean the sim holder with some alcoholic solvent and refit that ...
...sim card holder or the sim card holder is in loose contact ... just open the handset and remove and clean the sim card holder with some alcoholic solvent and refit that correctly and then get your ...
...sim holder port ... i think there is loose contact near the sim holder port so just open the handset and refit it correctly ... do it if you are good at opening the handset .... if needed replace the ...
...a small wire/paperclip to eject the sim card holder on the side of the Ipad(small hole) once open put sim card in the holder only fits one way then put the holder with the sim card back into the ...
SIM card holder and contacts. So remove the battery and the SIM card., Use a paper to polish the SIM card contacts and the contacts on the holder. Make sure that the SIM when placed fits well into the
SIM card holder towards the compartment lid to release it (2). 5. Open the SIM card holder. 6. Insert the SIM card in the holder as shown (cut corner at the upper right). 7. Close the SIM card holder,
...sim holder,you need a needle or safety pin to push it inside until the holder comes out then pull it,you need a micro sim that fit's the sim holder,If you want to use your old sim,you can modify ...
Usually answered in minutes!
8,663 Questions
6,597 Questions
5,420 Questions
5,130 Questions
4,425 Questions