...get under the bed you have 4 to 6 bolts that run on each corner of the bed to frame rails , look thru holes in frame for big bolt heads to remove the bed, easy , hope this helps you ,thanks robert
bed on a 2007 chevy silverado I am trying to drain my fuel tank in a 2007 Chevy Silverado. Any advise?? 8 bolts...4 on each side witht he frame rails. 3 screws inside fuel filler door. from underneath
Question about 2001 Silverado 1500
...silverado 1500? take the six bed bolt loose and then take three buddies slide the bed back put in the new pump slide it back n place and put the bed bolts back in. if u drop the tank u can easily ...
...silverado short bed that i want to take off where are the bolts that hold it on and what size socket do i need to use thank you Don't know the size of socket, but if you look in the bed of the truck, ...
...off Just take all the bolts out from under the bed that hold it to the frame( i think there are 6 or 8) and unhook the tailight plug and 2or3 guys to help lift it off. bolts are in the frame under ...
Question about 2008 Silverado 2500HD 2WD
I would like to remove my truck bed on my 2500 hd. How is it attached as there are no bolts through the bed like the older models. NO BOLTS? Theres got to be some somewhere.
...Silverado 2500 6.0 litre fuel pump How do I change it? lifting the truck bed off the frame works best if you dont have a lift..take the fuel neck loose from bed and remove bolts holding bed to frame ...
Silverado 4x4 located in the gas tank? Yes the fuel pump is located on top of the gas tank. you will need to move your entire truck bed to get to it...alot easier than taking the gas tank down. simply
...silverado to access fuel pum The easiest way to access the fule pump is to lift the bed or drop the tank. I have lifted the bed on many occasions. Just remove the bolts that hold it to the frame, but ...
Question about 2012 Silverado 2500HD Work Truck Crew Cab Pickup 6.0L V8 FFV 6-speed Automatic 6.6 ft. Bed
...Silverado 2500 pick up truck. This truck has a gas engine take positive and negative cables off of battery. now take battery hold down bolt out from back side of battery nearest to the cab. now lift ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions