repalcing video card in emachine w3611 moniter says ni signal no signal try open your system unit get the memory then put it back then try to switch on your computer
there is no signal getting to from my computer to the monitor - Help... I have replaced the cord, but it did not work. The monitor is working fine as I hooked it up to another computer. Tries the ...
when i turn on my screen it says no signal and turns off Either the "data" cable between your screen and your desktop is defective, or that cable is not connected to your screen, or that cable is not ...
...on a little louder than normal but nothing else happens,no harddrive light or noise ,screen says no signal...she just hooked up to the net earlier this week.She turned off the pc last nite.then today ...
Emachine w3507 blue light only comes on fan runs nonstop, no signal or monitor, pressing the f8 did nothing If you get nothing but a blue light and no video at all it sounds like you have a bad power ...
...signal on my screen try hooking it up to an external monitor through your vga jack and see if the sceen appears on the external monitor first. if so then its most likely a bad back light on your ...
monitor says no signal when turned on tower beeps three times when turned on Check the memory cards are inserted correctly (remove and reseat)
Usually answered in minutes!
49 Questions
27 Questions
26 Questions
23 Questions
20 Questions