Questions & Answers for: shuts down Irons

My rowenta iron keeps shutting down while I'm ironing. What can I do ? Hi, The cord is bad... Here is a tip that will help you to troubleshoot your iron and figure out what is wrong with it. Electric ...

I have a Rowenta Pro. Iron, model DE-86.1A with auto shut-off. It sticks on auto shut-off. I have to move it around for it to heat up, as indicated by the sensor light on the top. I believe that is ...

auto shut off how to turn back on? how to turn off or get iron going when auto shut off comes on? The automatic shut off is a protective device to let the iron cool down when not in use. Normally, if ...

...shuts off. I think it is probably the auto-off feature, but it goes off when I am trying to use it. Iron does heat up, but powers down after 20-30 seconds, light on handle blinks rapidly. The problem ...

Rowenta iron will heat up and then shut down. Have to keep plugging and unplugging the iron. Irons use a potentiometer and thermister to control the heat on the element. One of these components is bad

...up fine and only works for a few minutes; then it suddenly shuts off... I will notice it is not working as well and I look down and the light has gone out. temp limit switch bad... replace

DOES THE ROWENTA DX1070 NOT HAVE POWER ON OR OFF BUTTON POWERS DOWN BUT DOESN'T SHUT HEAT COMPLETELY OFF AND WHAT IS 3 WAY adjust thermostat in lowest position

shuts itself off while ironing. ... The last 3 have either leaked everywhere or the cord where it joins the iron keeps switching the iron off. ..... from the stainless steal down the right side of the

My teal steam generator keeps shutting down and ose not reach temperature If you live in a hard water area, scale build up on the element could have caused a hot spot and damaged it. If the element ...

...shuts down. Also it doesn't seem to retain its heat level for extended p eriods of time. They are built to shut off after about 30 sec or so if the iron is not moving and the iron is in pressing ...