Question about Office Equipment & Supplies
...work? I was able to figure out the solution for this by taking apart the shredder.My model is a TX61B. There is a piece of plastic that is attached to an internal sensor. You can see it below the ...
Shreder works in reverse but not in forward. Royal ht500a Shredder works in reverse but not in forward. How can this be fixed? Thanks, Hello, Check in opening and see if paper switch is stuck.
...shredder doesn't work going forward but it does work in reverse only. sounds like you have a sensor problem. is it automatic reversing on jamb? if so sensor is defective, or there is a bind causing ...
Question about VF1000MX Shredder
...Shredder works briefly in reverse, but won't run f... Shredder works briefly in reverse but won't run forward in the auto position even though paper is blocking the beam. Same thing for the cd ...
...shredder motor is working but it will not go forward to shred. It will reverse. I've unjammed every visible paper jam but still nothing. HELP! If it wont run forward but does run in reverse you may ...
Question about P35C Black Cross Cut Shredder Shredders
...Reverse operation is selected by switch position; no sensor is involved. I would bet that if you remove power and turn the shredder upside down you will find bits of shredded paper clogging your ...
...shredder will only work in reverse. There must be a button on the shredder you need to push so it works forward, this button has 2 options: forward for shredding, and backward to push caught papers ...
shredder only run in reverse This applies if Reverse is forward, and forward is running in reverse. If someone worked on it they may have reversed the wires from the motor to the board. There are four
Question about 602 SC Shredder
...shredder only goes in reverse. I did oil it, but it doesn't work. did you try to fix the forward problem by oiling it? That would be my first choice. The Forward and reverse switch would be my first ...
Question about 602 SC Shredder
...shredder works in reverse, but does not shred. there should be a forward/ reverse switch that is used to unjam paper being shredded. check that if it is automatic then check for paper stuck in the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions