Question about Royal Office Equipment & Supplies
...advise. If the blades rotate then the paper should go in...just be sure the blades are turning in the forward direction and not in reverse.Also make sure you lubricate the blades with shredder
shredder blades. Take a look at what drives the blade, If it is a toothed belt then mabie some teeth have been taken off by a bad Jam so the blade will spin until it comes to the worn part of the belt
Question about SPL616X Cross-Cut Shredder
...shredder all the paper gets stuck around the blades what can I do? Do I need to put some oil on the blades? Yes you do need to oil the blades, but it is important to get the right oil. Most stores ...
Question about Intellishred PS-79Ci Shredder
...shredder blades with pliers or use canned air and blow the edges of the blades. 2 Place the paper shredder back on the collection bin base and plug the shredder back in. Rock the shredding direction ...
Question about Intellishred PS-79Ci Shredder
...shredder blades with pliers. 2 Place the paper shredder back on the collection bin base and plug the shredder back in. Rock the shredding direction back and forth between forward and reverse. Pull on ...
Question about Intellishred PS-79Ci Shredder
...blades. 3 Spray the shredder oil through the blade opening or throat of the shredder. Spray it in a stream. 4 Plug the shredder back in and switch the reverse button on. Then run it for 10 to 30 ...
Question about Sc120 Shredder
...shredder blades.3. Start the paper shredder in reverse, allowing it to run for 10 to 20 seconds before stopping the blades. This will evenly distribute the oil to all parts of the cutting assembly.4. ...
...shredder blades Please don't put your fingers near the shredder blades or put any foreign object near the shredder blades when operating the machine. Most machines will allow you to reverse the ...
...blades from the shredder. Be sure to handle the blades with care, as they are sharp and can cause injury. Inspect the blades for any signs of wear or damage. If the blades are dull or damaged, you ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions