Shop Vac (Wet/Dry) Model 5275 (120V 60Hz 6.4A), Peak HP of 2.75 While vacuuming the Shop Vac fell over, stopped working, and would not come back on again. Tried plugging into another outlet, etc., but
shop vac 90L400 stopped working won't start I have a shop vac that I was using and it just stopped. It is a 90L400 I can't find my manual so can you please advise & let me know where I can view a ...
...shop vac no power when turn on I have a craftsman shop vac model #113177440 won't turn on when plugged in tried different outlets was wondering if switch was bad or what the problems is I just picked ...
Question about 925-09-62 QSP Plus Wet/Dry Vacuum
where is the circuit breaker on a wet/dry shop vac There is a thermo fuse in the field winding under the tape. When it overheated the fuse went bad.
shop vac it shut off while in use i took it apart and cleaned it checked wiring but still nothing There is a hidden thermo fuse in the tape on one of the field windings. If it overheats that fuse will
shop vac fuse fuse is blown Very rarely do vacuums have a fuse in them. You probably have a bad switch or possibly a bad motor. Take the darn thing apart and check the copper wiring to see if there is
shop vac stopped working for no obvious reason, my shop-vac model 2015A stopped running after being turned on moments earlier. any ideas as to why? is there a fuse that could have burnt out? Motors ...
Question about Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum
Shop vac doesn't work. Does my shop vac have a thermo fuse? is there a thermo fuse in my shop vac model lb650c ? Wont turn on, checked continuity in switch, and not have receipt to return. It was gift
Question about Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum
shop vac model QAL80A ON/OFF SWITCH You may be able to fix it with a simple 15 amp car fuse. My model 14LT400 suddenly stopped after a shoelace wrapped around the impeller. Here is a picture of what i
Question about Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum
my 3.5 hp 8 gallon shop vac wont turn on. Fuse? Reset switch? possible a start/run capacitor failure take it to a vac shop for diagnosis and repair
Usually answered in minutes!
1,132 Questions
1,137 Questions
870 Questions
836 Questions