...4wd to 2wd has come loose. It will not shift anymore and feels like it is not connected to anything. Is there a linkage pin or something that could have come out and how hard is it to get to? yes ...
...4wd/2wd shifter doesnt work and has been stuck in N so my truck doesnt move.... hi there, check the shift linkage on the transfer case, it has an adjustment. it might just need adjusting or it is ...
...4wd shifter seems to move with little or no resistance and when I shift it up to 4lo I get like a "clunking" sound like something is not fully engaging. Please help me Did you ever figure it out? I'm ...
2000 durango with nv242 transfer case . what holds the cable to the 4wd shift lever It should be a linkage rod with nylon clips on each end
...4wd transfer case shift lever 2000 durango nv242 transfer case hey, im a usa sailor and i have also encountered this problem. how i fixed it....., you may be missing a little rod that attatches the ...
4wd hi/low.....i wanted to test it to make sure it was operational. Well, i tried by following the trucks manual and i'm not sure if it was working or not....i really couldn't feel a difference when i
...4WD transmission any one of which might have gone bad. Pricing varies depending on which one you are replacing. When you remove the pan you should see 2 to 3 of them right away. Removing the cover ...
...either turn on or shift it into either 4wd high or 4wd low.. shift the tranny into reverse and roll back approx 5-10 ft you should be able to hear the hubs lock ..now your ready for the mud..have ...
Question about 2000 Durango
...shift gears if I have the truck in 4 wheel drive? Does anybody know what would cause this?? is the rear driveshaft still there?? sounds a bit odd to me. do you mean it wont move unless in 4wd? ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
