Questions & Answers for: Ford Explorer the shield

...down from the manifold and bends at the frame. You'll see between the exhaust and the frame a heat shield. Remove the two 13mm bolts on the frame and bend the heat shield downward, it will be able

...ever. If you don't pass the next emissions test, then replace it. But it could just be the heat shield rattling instead. Take the shield off first, to see if it goes

...vehicle on a hoist. For additional information, refer to Section 100-02 . Remove the fuel filter shield. Remove the nuts. Remove the shield. Remove the fuel filter (9155). Disconnect the fuel

try to find fuel fiter on 2005 ford explorer It's on the frame well hidden behind a heat shield that looks like a brace. the heat shield is held on with 4 bolts, 2 each end, trace lines down when you ...

...located on the front top of your fuel tank ! access to the filter is obtained by removing the heat shield at the front of the fuel tank, there are two bolts retaining the shield to the right frame ...

...at the top front of the gas tank (under the truck). To access it you have to remove a metal heat shield that is bolted to passenger side of transmission crossmember. 3 bolts hold it on. Then you ...

...press on the pedal lately? just a thought. hope this helps and good luck have you changed your windshield. The moulding on exploers are bad for leaking air at top but sounds like bottom of shield ...

...side near the front of the gas tank, just behind the catalystic converter. There is a metal heat shield that must be removed before you can access the filter. After removing the heat shield there ...

...noise at 30 miles and when you leave off gas it stops Sounds like a converter or muffler heat shield.This is nothing to worry about if that is the problem.Next time you get it serviced get them ...

...a noise under the car when I press the gas Is the Noise from the Gas Pedal? A Rattle from the Heat Shield? There are so many places it could be coming from but the HEAT SHIELD on the Exploders has ...