norelco shaver, 7310XL will not run with the headsdown in place- will run if open? The shaver is charged and all the heads are in place but when you close the heads down on the shaver - locked down ...
Charged up but seems jammed I've charged up but it seems jammed. When I take head off it seems to be working. soak your blades in a boiling solution for a couple of minutes.
...stopped working Remington R830 Make sure you are using the trimmer with the shaving heads on the shaver. With heads removed, the trimmer on the back will not work properly. If thats not the
...shaver head closed, no rotation and I hear a high pitched tone.I can rotate the cutter clades manually with a paper clip so they do not apper to be jammed. What am i missing? something is jamming the ...
...switch assembly is broken. You will need to replace it. It comes with the whole outer case of the shaver and is available at shaveroutlet.com. See link below.
...tips of the gears to twist off. To prevent this from happening, make sure that you disassemble the shaver heads and thoroughly clean the teeth on a regular basis to prevent them from getting clogged ...
when i turn on my shaver it just hums. no cutting sound. Possible that the blades are clogged with hair or dirt and the motor is jammed . Use the fine brush that had come along with the shaver to ...
Model 8060X locked up and will not spin. When I remove the shaver head, the razor spins like normal, but when I replace the head it will not spin. What could be the root of the problem and possible ...
...it to jam. Watch the video below to make sure that you have the heads in correctly. http://www.shaveroutlet.com/philips_norelco_heads_replacement If you have everything in correctly and it stll ...
...it to jam. Watch the video below to make sure that you have the heads in correctly. http://www.shaveroutlet.com/philips_norelco_heads_replacement If you have everything in correctly and it stll ...
Usually answered in minutes!
356 Questions
246 Questions
187 Questions
140 Questions
159 Questions