sharp copier MX2700N with an error code of FK1. What do I need to do to fix it? fuser count has reached 200,000 copies. hit P*C* then 24, start, then 4 start. select Fuser Unit and Fuser Acum Day then
I HAVE A SHARP MX1800N AND THE CODE OF FK1 KEEPS FLASHING ON THE SCREEN DOES ANYONE KNOW WHAT IT MEANS You have a bad FUSER unit....expensive!! It is not heating up.
...FK1 means? Your fuser has gone past 200,000 sheets of usage and it's time for a rebuild. You could reset the counter with sim code 24 but eventually it will clog up with waste toner and your rollers ...
Maintenance required. Code:FK1 What does this mean? It means that your fuser unit has reached its lifespan: you can still use the machine but be aware you will need a fuser rebuild in the near future
...fk1 sharp 2301 N That is a maintanence code. Usually says that the fuser rolls are at a certain copy count. Here is what to do. Press in order on the consol. # * C * That will enter the machine into ...
what is sub code of fk1 WHAT IS THE CODE FK1 refers to the maintenance life counter for the fuser unit. The fuser rollers have a fixed life count & when that count is reached FK1 is displayed. If ...
Question about Mx-3100n Color Copier Super Clean-practically
...FK1 prevent printing on a Sharp 3100N printer/copier? Hi, Yes it will if SNMP is ticked in the Ports tab situated in the printer properties of the print driver. To check this open up Printers & ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions