Questions & Answers for: sharp blinking green lights codes

...Sharp TV Turn on your TV. On your Tune In remote, press TV and release. Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key. Enter ...

...Sharp Aquos 37in LC-40C37U tv needs to be reset how would I do that? Not getting any power, only a green blinking light. The power supply board checked out ok. Blinking light is an error code. Count ...

...Blinking code details to many brand TVs, including Sharp is given. http://electronicshelponline.blogspot.com/ Pull up previous posts by its left sidebar, or type in the brand name and model number to ...

...Sharp LC37SB24U the green LED power light blinks once a second I hold the power button down for 5-10 seconds and the LED power light will change to red then I let off of the button and press it again ...

...sharp tv These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will ...

...Sharp TV-LC-60C46U no power,blinking green light These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty ...

sharp 32in tv lc-32234u green power light flashes does not turn on power light flashes does not turn on These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at ...

...sharp Aquos model number LC-42D64U want turn on. The power light flashes green twice and OPC flashes green three times. What could this be? These blinks [flashes] are fault indication (Error Codes). ...

Blinking green light. Replaced main power board, no change. Is there another board that needs to be replaced? Sharp LC-46D85U These blinks [flashes] are fault indication (Error Codes). From the number

Sharp Aquos LC-46E77UN. It was not powering on, kept shutting down. I replaced the power supply board, and the problem is not fixed. When plugged in the power and opc lights blink green twice and then