...tension, and my machine is not even 6 months old! The thread breaks when I pull the fabric away from machine after sewing. Very frustrating! Any suggestions? Are you making sure that the needle is in ...
...tension, length and width set the "auto". Extremely frustrating. Any idea as to what the issue could be? Had the same problem as mommyb2 - it was the bobbin spindel was in the wrong position. Push ...
...tension was set at the factory and should not need adjustments. My Singer 7422 seems to be jammed. When I start to make a stitch, the thread from the needle gets caught on something on the bottom and ...
tension is to loose despite what ever numer i try Thanks julie You can find Singer bobbin winding instructions at http://www.singerco.com/resources/bobbin_wind.html. "Birdnesting" occurs when there is
Question about 7442 Mechanical Sewing Machine
...Tension seems fine, i have never used any other stitch. Singer Prelude.. If you cannot form ANY stitch at all... Check the timing of the needle to the hook. HERE is a guide to generic principles of ...
...sewing. Make sure the flat side of the needle shank faces to the back of the sewing machine. Always thread the machine with the presser foot up as this will "seat" the thread into the tension
...sewing easily, we changed the type of stitch from straight to slant pin stitch BUT did not change the width or length. (you learn to read after wards) About 10 inches into the stitching the machine ...
Question about 7442 Mechanical Sewing Machine
Bottom sitch skips and gathers and when I use reverse it gathers up. I have changed needle, thread and boobin, I have also cleaned and oiled boobin area. Either your bobbin tension is wrong or, your ...
I can't get the thread and bobbin to make a loop to start my sewing. [email protected] it sound like the timming is off, if your machine won't make a loop at all it has to be serviced now if it makes ...
Question about 7442 Mechanical Sewing Machine
...thiknesses together ,sewing sattern to linning Suggest checking proper bobbin tension, and you may need to add a evenfeed foot so the top and bottom material feet at the exact same speed and
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions