...your machine. It is impossible to explain how to put the thing back together and re-time it, it is something you need to be shown how to do. Other alternative is to take it to a sewing machine
...sewing machine oil NOT 3 n1 oil) the round outer area where the hook rides. No lint at all and squeaky clean. Then 3 drops of sewing machine oil in rounded groove where the shuttle hook rides. Then ...
...shuttle race cover. It has a black ear on the right and a black ear on the left. Push the right ear to the right, and the left ear to the left and the silver ring should come out. Behind the silver ...
...sewing machine I want to keep threaded just for basting so I don't have to use my primary machine for that task. I don't have a manual for the XL-2022, and I don't know how to assemble the bobbin ...
...sewing but tried to make curtains recently. (Quite thick fabric and I'm not sure if this is what started the problem) The machine was working fine until I had to change the bobbin thread, on starting ...
...sewing hook back and forth. They have a tendency to slip gears, causing the problem you are encountering. Take out the bobbin case and remove the shuttle cover. Put the machine into its back, set at ...
...Now the hook doesn't catch at all. it's possible that when you broke the needle it caused the machine to go out of time & only a sewing machine repair shop can retime the ...
Question about 6199 Brilliance 100-stitch Sewing and Quilting Machine Refurbished 6199.FS Brilliance Sewing Machine Refurbished
...caught by the hook in the bobbin area. So how do I adjust the shuttle movement? Brenda Are u sure u have the bobbin in the case correctly? It should turn counter clockwise when u pull on the ...
Question about 6199 Brilliance 100-stitch Sewing and Quilting Machine Refurbished 6199.FS Brilliance Sewing Machine Refurbished
sewing machine I am havine problem reassembling the shuttle hook , it does not hold after I in put and the needle gets jam Typically, they go together like this: http://www.manualslib.com/manual/85659
Question about CS-8060 Computerized Sewing Machine
...shuttle is typically caused by improper threading through the upper tension disks and takeup lever. Check the instruction manual, carefully rethread the top of your machine and make sure the presser ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions