Questions & Answers for: sewing machine needle shank going

Question about Viking 1

1 Answer

...most Low Shank machines. ANd no, you can not change the shank from high to low. Doing that or attempting to do that will not allow the needle to go all the way down as it would set for a high

Ad

...sewing machine. Make sure the needle is not bent. Also, there may be thread tangled in the bobbin area. Open the needle plate and bobbin; clean away any lint or thread that has accumulated there. If ...

Ad

Question about XL-5340 Mechanical Sewing Machine

1 Answer

sewing machine does not appear to go down far enough to catch the lower thread. Hi. Check to make sure that the flat side of the needle shank is facing to the rear (away from you), that the needle isn

Question about XL-5340 Mechanical Sewing Machine

1 Answer

needle shank when a needle breaks. The Embellisher comes with two alan key screwdrivers for changing needles. Insert the larger screwdriver at the red marking to loosen the entire needle shank. Remove

Question about Memory Craft Compulock

1 Answer

...seems as if it's disconnected from whatever drives it up and down. sounds like the machine needs to be check, to see if some parthas come loose or broken, a sewing technican can tell for ...

...is probably not a walking foot that is made for this machine but there may be some third party suppliers that have a walking foot that will work. Stitchery Sewing Machine Attachments Needle and ...

...Sewing machine feet Super high shank high shank slant shank low shank snap... This is posted in the UK, but you should be able to find something similar in the US: Toyota 2260 Sewing Machine Feet ...

...foot to screw-hole that holds the foot onto the presser bar. Singer slant is for slant needle machine only. A high shank machine measures approximately 1 1/4" from the screw to the bottom of the

The manual said to use White Rotary flat shank needles only. Is there a replacement needle that I can use that will not harm the machine? Thank you for your input. White Rotary flat shank needles only

...sewing machine phoned silver who make them to ask for a walking foot Which they sent me extremely quickly but no instructions for fitting it,so how do you put it on .Help For most sewing machines, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...