Questions & Answers for: sewing machine knob stuck

sewing machine gets stuck in reverse The reverse button gets stuck when I use it. I am able to take the side cover off and use a screw driver to pop it back out but what can I do so that it won't keep

kenmore sewing machine My clutch knob is stuck. I can spin a bobbin and fill it but the knob will not turn away from me now. My belt is slipping

...sewing button stuck HELP!! Model 6430 Viking has the reverse button located in the center of the stitch length dial. It is firmly jammed in the reverse position causing the machine to sew ONLY in ...

...sewing. I have cleaned the hook race and feed dog but nothing is helping. Can you? Be sure you have the top threaded correctly, from the first thread guide down to two, up to three (silver hook at ...

...stuck. The knob that must be loosened to wind the bobbin is stuck Remove the needle, and place a screwdriver or something like it under the needle bar to keep the wheel from turning. Wrap the knob in ...

...sewing machine I have a Necchi 536 FB, probably 15 years old. Works well, except that thread gets really taught in the machine. It gets REALLY stuck where it's threaded around the knob called the ...

machine wont work. Check around and see if it fell off when you removed the knob, or check to see if it is stuck inside the knob. The washer is about 1" in diameter with a couple little tabs on it. It

sewing machine oil, ie Bernina for mechanical machines. NEVER use cooking oil, 3-in-1, WD-40, and probably not generic sewing machine oil from the fabric store. Recommendation is to oil every time you

...all the lights come on and the machine will not start. It also starrts to beep Not much, I cannot find reset or any other help Have you tried turning the hand advance knob? Maybe the motor is

...sewing machine that was working 2 years ago. It is now stuck in reverse.the stitch selector knob will not turn either. It will sew in reverse. how to free up the button and knob. Stitch selector knob ...