Questions & Answers for: sewing machine isnt stitching

stitch lendth isnt working, all the stitch lengths come out the same regardless of the setting Are you sure that the feed dogs have not been dropped to enable embroidery, and not returned to the ...

sewing the machine keeps missing stitches and isnt sewin properly massive big stitches Try a new needle first if that does not work email me and I will attach timing instructions but tell me what make

...machine really isnt quite designed for leather. What has happened is your hook to needle timing is out. When you sew through thick materials, a lot of machines have issues where the needle sticks ...

...sewing in a straight line, it's perfectly fine. Can't seem to figure it out. It is probably because you need to move slower when moving the material around, as otherwise the thread beneath will just ...

...sewing machine, the stitching isnt tight You do not say if it is the top stitches or the bottom stitches for the bottom tension, check that the thread is tight around the bobbin. Make sure that the ...

...sewing machine. Always be sure you are using the correct bobbin for your machine. Class 66, Class 15 and Class 15J bobbins look very similar. However, using the incorrect bobbin class in your machine ...

wont sew thread keeps coming out of needle bobbin isnt catching the threaded needle you have to hold the loose end for a couple stitches when starting off Pull at least 6" of thread through the needle

...sewing machine . nor do the put hour meters on then . Computerized sewing machines generally do have a stitch count or hours count or both. However, usually a technician is the one who would know how ...

...machine isnt sewing the thread just lays on the fabric instead of stitching. i checked the screws and they all are tight. Try installing a brand new needle. If that doesn't work, most likely the ...

...stitching. most problems with machines involve.bad needles incorrect threading of bobbin or spool,dirty bobbin,incorrect needle. it sounds like the needle isnt catching the bobbin thread. hope this ...