Questions & Answers for: Compaq setup

Original setup was interrupted Cannot continue with original setup. Power cord fell out during the original setup. Error message says "The system is not fully installed. Please run setup again." I ...

hello what i should do press and hold the f2? turn on the computer Press F2...that opens the bios setup screen... Hate to say it, but I have five N610C laptops and they all use F10 to enter setup. ...

How do I get to the Compaq Armada 1592 Setup page How do I get to the setup for the Compaq Armada 1592 Usaly its "F10". Also, what for? Try this: Push F10 when the bios screen appears, If doesnt helps

help getting into the bios setup. I need help getting into the bios setup.what keys do I enter at post to get into the bios setup utility? Hi there. The key should be F2 on start up. Good luck and ...

i dont know the setup password i turn my laptop on do my power on password then it comes to the screen where it has safe mode/start windows normaly or last known configuration ive click all of them ...

Compaq Presario2500 don't go in setup Compaq presario 2500, won't boot up, when I press F2 it shows entering setup but it stucks and don't go in setup...help me... my email: [email protected] ...

how do you enter setup on a compaq evo n115 If you system has windows XP as Operating system, press F1 at the compaq screen to Enter Setup For vista press F10 to Enter Setup. Please get back for any ...

i can not setup windown xp in compaq presario cq40 why not? Go through the link mentiontioned below and setup Windows XP in your Compaq Presario PC Notebook ...

Bios rom checksum error The CMOS setup has gotten corrupted. This may have happened if the 3 Volt coin battery on the motherboard is low. If your date and time is wrong, that is a clue the battery ...

Comapq R3000 laptop powers on then off. When I power on my Compaq R3000 laptop I can enter the BIOS setup menu and run the HDD diagnostic, but when I exit the Setup menu the laptop immediately powers ...