Questions & Answers for: Timex setting time Coffee Makers & Espresso Machines

Question about (T307S) Clock Radio

2 Answers

time setting, press and hold the J Time Set Button so that the clock display begins flashing. 2. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the time. Hold a button for

Ad

time button to set time. press snooze button to set alarm I have same clock, I hold time down same time as hour or minute and nothing happens. But alarm setting works. Help? It's for my step daughters

Ad

setting the time within ten seconds of pressing the button, the display will stop flashing and you will need to press the Radio Alarm Button again. 2. While the display flashes, press the Reverse and

Question about T311T Clock Radio

1 Answer

...button for faster forward or backward adjustment 9. Press the Time Set Button again or wait for about 10 seconds to exit the time setting process. Two beeps will confirm time setting mode is

Question about T311T Clock Radio

1 Answer

setting instructions: Clear the timer by pushing hour and minute at same time. To set current time, hold time button down and push hour. Then hold time button down and push minute. To set the time for

Question about T158W Clock Radio

1 Answer

...setting the time or calendar, if you do not press the appropriate buttons (as explained below) within approximately 8 seconds, the display will stop flashing. If this happens you must follow the ...

Question about (T307S) Clock Radio

1 Answer

time zone setting, press and hold the 8 Time Zone Button. The current Auto-Set Time Zone in the lower-right-hand corner of the display will flash for approximately ten seconds, after which the display

Question about Auto-Set Dual Alarm Digital Clock Radio

1 Answer

...setting the time within ten seconds of pressing the it, the display will stop flashing andd you will need to press the "alarm Set Button again. 2. While the display flashes, press the "Tuning/Set" ...

Question about (T307S) Clock Radio

3 Answers

time setting, press and hold the J Time Set Button so that the clock display begins flashing. 2. While the display flashes, press the 1 Reverse and 6 Forward Buttons to set the time. Hold a button for

Question about 1440 Nylon watch

1 Answer

...time/date setting mode. -- you can only do one or the other without exiting the setting mode (time or alarm set). - within the setting mode you use the two right side buttons in obvious ways to set ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...