phone which is an AVAYA 6408D With the handset on the hook press the conf button (the one with three phones on it). The phone should ring with your current ringtone. Each press of the conf button will
change the time on my 6408D phone. Is it done on the phone or via the Phone system console? Thanks Edwin Phone system console. Contact your system admin, as it depends on exactly which system you have
...voice multiplexers. However, they do have multiple Avaya G650s and G450s. I do not want UK G650s / G450s to work as ACD for us out of UK; instead seeking some advice for some mechanism to pass these ...
...Voice mail system is sending the message waiting indicator if all phones also check any trunks to the voicemail system I had a similar problem like you, and it really bugged me a lot. Hopefully I ...
...phone only rings once and goes directly to voice mail before giving me time to pick up, how can I change number of rings before pick up? Sounds like you have either send all calls (SAC) enabled or ...
...set so it shows a department name rather tha a phone number. You have a Definity system, unfortunately, these are very high end systems, and you will need to contact your system administrator as it ...
...avaya 6408d phone well.. we use a definity and i use site administration and on the station account its self i have a COR setup to restrict the phone from dialing out. if you want help and have the ...
Question about Definity 6408D Corded Phone
...voice mail We have an avaya 6416D+M, we use a definity system. The user dropped his phone and now it will not ring more than about a half ring and then it goes straight to voice mail. He wasn't sure ...
...AVAYA 6408 phone and it is going strait to voice mail when someone calls and I cannot get that off You activated that feature yourself by hitting *3 you may want to use this when you go on vation so ...
...voice messaging and the mailboxes have been set up but when the phone rings twice it goes to fax not voice messaging. How can I fix this Your voice mail extensions are programmed incorrectly in the ...
Usually answered in minutes!
3,453 Questions
1,326 Questions
1,157 Questions
1,197 Questions
607 Questions