Questions & Answers for: set motion lights

set, and want to move the motion detector to the new light unit. Thanks Norm Johnson Go to http://www.heath-zenith.com/search.cgi (displays as HEATHCO webpage) and search for SL-5316 ... choose manual

...motion light goes off and on. I've rearranged the light and the sensor, now I would like to disconnect the sensor. You should be able to set it to manual,according to ...

...set to on, and off from non motion switch in other area. But, when I move switch to auto on sensor, the light goes off in approx. 1 minute (I have timeout set to 1 minute) but then immediately turns ...

Motion light stays on If there is a "sensitivity" setting, it appears to be sett too sensitive, therefore the unit thinks there is constant motion.

how to set a outside haligen light. how to set a outside halogen sensor, motion light. An inquiry sent directly to Morris may get you instructions.

Brinks motion activated security light model 7160w. Only stays on for about 15 seconds. Setting is on 10 minutes. Can someone help? Sounds like the motion sensor is not picking up motion. Or, does it ...

...SET IT UP? Defiant Motion Security Light #1001311056. I got no manual with it. I have installed it, but I am unsure how to set it up to work in motion detection mode at night. 5 min. on time? I ...

...motion lights are positioned and set according to your needs. Step 1. Move the sensor from "Operational" to "Test" mode. This switch is located on the bottom of the sensor and turns the light off ...

motion sensor led floodlight be set to come on permanently The specific capabilities and settings of the PnP brand 30W motion sensor LED floodlight may vary depending on the model and design. However,

...motion sensors during a designated period of time. To set the nighttime silencer, push and hold the "Nighttime Silencer" button for approximately 5 seconds until the "SET" indicator appears on the ...