...set incorrectly, there are 2 things it could be 1) your software is telling the printer the label length is longer then the current labels, even if the label size is out my a single millimeter the ...
Question about 110XiIIIplus Direct Thermal/Thermal Transfer Printer Motherboard
...set Height (count with space between labels, so measure from the start of the label, till start of another and Width. -> click on NEXT -set other settings -> click on NEXT -set width and heigh (this ...
Question about EasyCoder 3400 Thermal Label Printer
...labels every time I want to print a single 4x6 label. The first label coming out contains my data. The second one is always blank. Why do I keep getting a second blank label? I have the "perset" ...
...it seem your label maker is set to the last(amount) of labels printed. Go to: Print Labels, click; Number of Labels; clear to set to (1) Label. That should stop the run off of labels. Thanks ...
...setting coming from the label software / printer driver. It's set too low and that setting will usually override the darkness setting in the printer. That's why test labels are fine. Hope that
however the last 1/4" or so is still left in the printer. Technically, it's like the printer is not set for "tear off label". My old Zebra 2442 would extend the label out so the perforation of the 4x6
Question about LetraTag QX50 Thermal Label Printer
How do I change the size of the print on the label Using the software that came with it modify the font settings. Changing the Default Font Settings in DYMO Label Software Answer 299 ' Applies To DYMO
...labels without a problem. However when I tried to print a 4x6 label it still thought there was 4x13 stock in the printer. I played around with the label format size, even setting up another instance ...
How do i adjust the sensitivity of my touch pad for my Toshiba laptop PSLB8U-05202F 1.Turn on the computer and log into Windows as normal. Open the "Start" menu and click on the option labeled ...
Question about 105SL Thermal Label Printer
Zebra 105sl - printer does not print correct size I have set the label to print a 4 x 6 inch landscape label. When the label prints it shrinks it to prints appx. 3 1/4 x 2 1/8. I have mess with the ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions