...idle is set when the choke is close to set the cam on the HIGH STEP. turn the car off hot, now pull the accelerator back and close the choke with your hand, now let the accelearator back to idle, now ...
...spring on top of the carberator. some units have an idle set screw also. if it has an idle set screw, turn it in untill it idles where you want it to, if it just has a spring, then replace the
...set the idle after I set (moving the distributor) the timing or how can I set the timing without advancing my idle. Thanks moving the distributor will alter the idle because it makes the engine run ...
...not the transmission, At idle in gear pull the plug on the idle Air control does it change in idle setting? If it doesnt change in Idle setting the adjustment that was use to control the setting ...
Question about 1997 Mystique
...set the other idle screw, curb idle, to the idle setting for your truck, probably about 700 rpm. You can move back and forth between the screws to get the best steady idle. ...
Question about 1997 Mystique
...set and idle for a while it starts idling up and down.any idea's? I have a 1990 S-15 with 4.3 motor idles high when you start, idles down , set and idle for a while it starts idling up and ...
...set idle on cbr 250 when engine won't start hi there you really cant set it properly as every bike idles differently,so you should get the motor running first were you can idle the bike with the ...
Question about 1986 C1500
...set the idle speed by the idle speed screw with engine at normal operating temperature. Then you set the linkage up so the cam is on a raised step, throttle will be held on that raised step. then you ...
Question about 1986 C1500
...or should the idling drop? thats what happens when you change the set screws,idle set screws will bring it to an idle,when you are at that 1st point,where it idles fine,stop,your idle set screw is ...
...screw for engine idle speed, later models did away with the enrichment screw, to adjust set idle screw to 600 rpm, adjust air mixture screw to fastest rpm , reset idle screw to preferred idle
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions