Questions & Answers for: set default tray hp laserjet

...tray 1 is set to "first" I would like for the default tray to be tray 2. I only want to use tray 1 when it is specifically chosen for labels. Is this possible? In paper handling set tray 1 to ...

default tray to be Tray 2. No matter how I adjust the settings, Tray 1 is the default. I have to go to the printer and manually select Tray 2 in order for the print job to finish. Your tray 1 might be

...set the default paper tray for a HP LaserJet 4200tn. I use letterhead in tray two and in tray 3 I have plain paper. I would like to default to tray 3. 1) When the printer receives a print job, it ...

...default You need to set your paper tray correctly. If you are using Letter, make sure the tray is set to Letter, and if you are using A4, set the tray to A4. "Any" is NOT a valid choice. You have to ...

HP Support advised me to deinstall the additional paper tray and the toner and reapply the firmware update 3 times. It sounded stupid to me but it worked!!! Make sure to use usb connection and wait 30

this problem? Please help me, Kathleen. Becouse the tray configured in the printer is tray #1 so it serching the paper on tray 1 first you can set it the default tray by the menu on top of the printer

...default tray if it is set to plain paper. In this case, you would set tray 3 to either bond or letterhead so that the printer would only grab from that tray if you request either tray 3 be used or ...

...HP Laserjet Printer 4015n are printing much slower than other regular sheets. Is this a graphics setting issue? Are you printing your maps from a different tray? Paper settings can have a huge impact ...

...paper letter size the printer will default to whichever tray has letter plain paper installed. You should also check your print driver default settings to ensure that tray 2 is set as default

...tray what is the default paper size for it is. https://hp-laserjet-1320-printer-series.printerdoc.net/en/managing-the-printer/using-the-hp-toolbox/advanced-printer-settings-window/ ...