Questions & Answers for: set 1 panasonic dvr

...SET 1" and doesn't do anything. Since the buttons on the machine are so limited, it's hard to do anything with it now. This fixes the *Set 1* problem. Set 1 means the remote cannot communicate with ...

1.Turn the panasonic tv on. 2. On the univercial remote control there a button mark code search or search. Pressand hold down the code search button until the LED light come on steady. 3. Press the TV

...If it is hooked up right to record as the program is on. Then make sure the input is set correctly, the tv should show pic from ext-1 the e-55 should be on channel 3. This should solve ur

...SET 1) THE DVR WORK GREAT, BUT THE REMOTE DOESN ' T. I ALREADY USE ( ENTER + 2 HOLDING FOR 10 SECONDS DO NOT WORK ALSO). i had the same problem. press enter, hold it down and press and hold 1 for ...

...1 imput. after 10 min it tells me it is switching and it goes to ''Game'' imput WHY??? Go to the main setup screen and check your defaults. You might have it set to go to a certain input after a set ...

set 1 problem on dvr with remote How can I get rid of the set1 display when using the remote for the dvr Press and hold ENTER and 1 on the remote for at least two seconds and you should be home and ...

set 1 remote issue dvr displays set 1 Press and hold ENTER and 1 on the remote for at least two seconds and you should be home and dry! Good luck!

set 1 According to page 15 of the manual, you should "Press and hold [ENTER] and the indicated number button at the same time for more than 2 seconds" This will work for SET 1, SET 2, etc. If you have

set up to watch tv is through the video option, not the tv or hmdi. Now i've tried unhooking the 2 cables that go into the back of the dvr. i left 1 on, and pluged the other one into the vcr and tried

Panasonic LCD TV, ATT Uverse cable box/dvr (att uverse/cisco/ISB7500), Toshiba DR410 DVD player/recorder. Connections: The cable box and TV are connected by HDMI (HDMI-1 mode on TV). The DR410 is also