...computer and that did nothing - the thick black line is still there. This is caused by dead pixel sensors. There are hundreds of pixel sensors at the edges of the screen, when they go out it will ...
sensor at the top. MOst screen protectors cover the sensor causing them to turn off the screen during a call and not allowing it to come back on. If you do have one on, take it off and try it without.
...sensor which will darken the screen in low ambient light. If the sensor is faulty, darkened screens will result. If the inverter is failing, you may be able to replace it, contact viewsonic. if the ...
screen side remove plastic panel. The sensor is clipped to radiator fins. Be Safe or don't do it.... On the side with the lint screen, remove the five screws holding the top panel in place. The sensor
screen sensor is not working. plzzzzz help me Hi bonnie1786, Have a nice day There are two major causes of malfunctioning of touch screen,the phone fell on a hard object or in water which could damage
...screen, i will advice you replace the sensor board. Because calibration requires you to touch the screen and since it is not responding to touch, it will be pointless trying to calibrate. Thank you ...
Question about iPhone Smartphone
...a laptop with windows 7 Would be great if you could tell u what brand and what model computer you are using. And a screen shot of the message o the screen, so we could see what sensor is doing
Question about iPhone Smartphone
...screen. The sensor is located inside the plenum where the screen slides into. It will be a small metal probe sticking out to measure temperature in the cavity. Make sure the big metal hose coming off ...
Question about Optimus Dynamic Black Smartphone - Tracfone microSD Slot, Android 2.3, 3 MP Camera
...sensor or even a screen protector over it, it constantly thinks it is up to your ear, hence blacking out the second you make a phone call. You can go into settings and call settings to disable the ...
Question about LG Optimus Dynamic II LG39C Smartphone fo
...sensor then place a call. If the screen does not instantly go black after you place the call, then you know for sure something is blocking it. If you have a screen protector, try removing that. To ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions