...with a 318 - 2 barrel carb.? Are reference pictures available? Thanks The only thing that comes out of the exhaust with a wire coming from it, is the oxygen senser. It is right behind the
Senser, Rather than switch has 2 side by side Vertical Parallel Male Titts. It also has 2 wires. Some engines Do not have a Temperature Switch, The switch on these are built into a temperature senser,
...senser located on a 2001 chev malibu 3.1 Driver's side,under the hood, screwed into the end of the intake manifold. Should have 2 wires,if only 1 then it's the sensor for the gage & not the ...
...senser where it locate at? I need a schamatic of all of the sensers. the oxygen sensors are located in the exhaust system. you can miss them just follow the exhaust. their should be one before the ...
senser on 2000 taurua. is it hard to change The cam position sensor is located on the drivers side. The intake manifold is cut out where it sits on top of the engine block.it is black in color and has
need to know where the speed senser is located on a vw golf tdi mk4 on the gearbox, between cockpit and engine. On the gearbox are only 2 sensors. one for reverse lamp, and one for speed.
I NEED TO KNOW WHERE ALL FOUR O2 SENSERS ARE ON A 2000 MURCERY SABLE all of them are located on the exhaust..2 on each exhaust
...sensor 2? I have the code Po154 which is an upstream sensor. I need to know the location. It has to be replaced so i can get the car inspected. o2 senser will be in your exaust pipe close to the ...
location of the fan senser on a 96 trens am ? Check the sensor near the radiator and the fan. Usually it is located near it. Sometimes a tube type plastic with 2 wires. Check your fuse also. Pls vote!
...2 ;temp.senser 1 high circurt high...running ruff Hi DALE,HERE'S A LINK TO YOUR CODE AND POSSIBLE CAUSES,THE SENSOR IS BANK I,SENSOR,WHICH MEANS IT'S ON THE SIDE WITH CYLINDER I AND 2 SENSOR WHICH IS ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions