Question about Tools & Hardware - Others
Senco narrow crown Stapler Piston will not go back On my Senco narrow crown staple Gun the Piston will not go back.If I push it back with a Screwdriver,it will shoot one Staple and then it will not ...
...Is some part missing? go to this site it will give you a break down of this tool . ...
Question about 2D0001N FinishPro2N1, 18 Gauge Brad Nailer/Stapler, Sequential
I have a 16g. Senco nail gun. The problem is that the pisten will not retract. The pisten is about 2 years old. It does get a lot of use in the high school woodshop. I took the pisten out and there is
Question about SNS45XP 16Gauge Construction Stapler
I have a senco stapleer (sns45xp). I put in a rebuild kit. Now the piston won't retract. If a piston won'tretract it's usually because of one of the o-rings around the cylinder. Take the gun apart and
Question about SNS45XP 16Gauge Construction Stapler
Why won't the driver retract on my pneumatic stapler Can't be more specific without model number. Driver not returning to top of cylinder is caused by several issues. Bent driver, piston oring, and ...
Question about SNS45XP 16Gauge Construction Stapler
...senco sps fires one staple, then hammer gets stuck forward. I have had this stapler since 1998 and it has worked flawlessly. until recently. I can shoot one staple, then the hammer gets stuck in the ...
Question about Senco M Ii Mii M2 A Rugged Stapler Never Used
THE GUN DRY FIRES. It appears the firing pin don't retract properly. What do I do? it may be bent....or try lubricating the pin withwd40, or replace the pin mechanism
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions