Questions & Answers for: seized drill chuck

Question about Drills

1 Answer

...drill and the chuck seems to have seized up. Won't turn at all. being that new, it should not have seized up, all you can do is try spraying wd40 into the chuck between the teeth and mandrill. if it ...

Ad

Question about Milwaukee Tool Drills

1 Answer

...drill 061220. The gears are seized and have taken it apart to where I need to remove the chuck to get at the screws to remove the clutch assembly. The chuck screw is out but haven't had any luck ...

Ad

...seized up and I can't remove the drill bit. Any suggestions please Hit a metal part of the clamp chuck to just create a "shock" using a hard rubber-hammer (or a metal hammer if the rubber one fails) ...

Question about DC988kar XRP 3 - speed 1/2" 18v cordless hammerdrill/drill/driver kit

1 Answer

...chuck. It is stuck It seems it has seized from rust or corrosion. Try using some penetrating oil or just get a new chuck. Mine did the same thing and I just replaced the chuck altogether. Good ...

Question about 18v 1/2" Compact Drill/driver Kit Dc759ka

1 Answer

Seized chuck. My drill/driver has a rusted screw bit in the chuck. Tried several rust remover / penetrating oil products. Won't budge. Can the chuck be removed? How? Thanks I would continue to use the

Question about 18v 1/2" Compact Drill/driver Kit Dc759ka

1 Answer

...seized and will not release drill bit. This is used on a regular basis if this is any help. Many thanks. Trev The cover on the chuck must be removed by using a punch, tapping around the drill side. ...

Question about DS14DMR 14.4V 1/2" Driver Drill

1 Answer

...a Hitachi DS14DMR cordless drill. I am trying to access a seized clutch assembly! I have removed the internal screw but don't know whether the chuck is screwed off or knocked off? most are screwed ...

...drill variable speed reversible double insulated model # 315.101420 The chuck is open completely and I am unable to release it so I can tighten a bit. I can't turn the chuck key to tighten the chuck ...

Question about 0612 20 14.4V 1/2" Compact Drill/Driver Tool Only W/ Case

1 Answer

how can I remove bit from driver that is stuck Is the chuck seized? This happened to me and I needed vice grips on the chuck in order to open it. Lube it up good afterwards.

...power drill,where the chuck has locked and seized up on the drillbit, can i change the chuck ? is the chuck a replaceable part It should be but you may find it difficult because of the seized

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Drills Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66949 Answers

john h

Level 3 Expert

29494 Answers

Steve Pack
Steve Pack

Level 3 Expert

7128 Answers

Are you a Drills Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...