Questions & Answers for: seized blender blade

...i can track one down? much appreciated! My food network blender has seized. The power is working but the blades do not move.Please advise. Thanks! How can I take the blender motor out. Model ...

Blender blades do not rotate I cannot see what is the matter, but the blender blades do not rotate. I think that I need a new bottom screw on cap, as apparently the little rubber black wheel is not ...

...seized up and left little black bits of the gasket right under the blade in the jar. Can I get this gasket? We bought this absolute AWESOME Blender at the Home Show here in Minneapolis, Minn. I can ...

...blender works, with that loud humming noise, no green lights, shuts itself off after a minute or so or working when it gets hot. Can you check it without the beaker on? It could be the blade seizing ...

...same thing and how to fix it! Good luck https://youtu.be/Iw6VXRSHyNM Nutribullet Base is known for seized bearings. Bearing #698RS is the cheap bearings used. An S304-698RS or S316-698RS would be ...

...blender? Take the blade assembly out of the jug, hold the blades with a towel and turn the driving clutch on the other end. Whichever way the motor turns those blades when operating, you need to turn ...

...please I have PowerBlend Duel Blender/Food Processor - BFP-10CH is working blendar Sounds like the bearings on the blades have seized. Replace the blade assembly by unscrewing the bottom of the

...blender - blade not rotating. What can i do? This has already been answered on Fixya We don't have this blender, but on ours gunk gets into the blade shaft bearing and causes it to seize. The way to ...

...seized up and won't turn, causing it to sound as if it's striping the clutch. Fixable? Yes fixable a number of ways Remove the blades and punch out the shaft. Clean it all and then reassemble it with ...

...Blender? The control knob light is coming on when connected to power but it's not working blending What could be wrong? Sometimes it is a seized shaft, does the blade turn by hand? It could be the ...