Questions & Answers for: security light 2003 gmc sonoma

Question about 2003 Sonoma Extended Cab

1 Answer

...2003, GMC, Sonoma that has a problem that's causing a failure of all of my instruments (gas, volts, oil pressure, temp, speedometer, odometer). Also, when I turn the key off, several of the lights on ...

Ad

Question about 2003 Sonoma Extended Cab

1 Answer

...SECURITY LIGHT ON YOUR CAR IS IN THEFT SECURITY MODE.TRY ANOTHER KEY.PUT IN IGNITION FOR 10 MINUTES IN RUN POSITION WITH ENGINE OFF.WHEN SECURITY LIGHT TURN OFF. TURN OFF IGNITION SWITCH .WAIT 5 ...

Ad

Question about 2003 Sonoma Extended Cab

1 Answer

...security light is on after some repairs to it now it won't start, help. how do i reset the security, it resets every time you use the remote or lock and unlock the drivers door with the key, if that ...

Question about 2003 Sonoma Extended Cab

1 Answer

to see if the security light stays on. If the security light is on constant, it will need to be scanned for codes. The fuel pump is very likely, and should be the first thing checked. Good luck...coop

security light to cut off the car starts fine but the security light stays on all the time It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many.

Question about 2002 Sierra 1500

1 Answer

...Security Light comes on and then the truck won't start. It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually the car begins not ...

Question about 2002 Sierra 1500

1 Answer

...Security Light comes on and then truck will not start It's when the security light starts flashing that the infamous "chip" in the key becomes a nightmare to many. Gradually the car begins not ...

Question about 2003 Sonoma Extended Cab

1 Answer

Security light is on and car will not start http://wiki.answers.com/Q/User:Disgustin%20Hatfield

Question about 2003 Sonoma Extended Cab

2 Answers

light. Any good shop or parts store can do it for you. you need a scanning tool get to codes menu and then to clear codes. if you can't get one try disconnecting battery for a few minutes but this mat

...security light off after changing blinker switch? truck runs 2 seconds than turns off That should not have happened ! Did you disconnect and forget to reconnect, or otherwise damage, the security ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...