Questions & Answers for: sebring intake torque

sebring 2004? Dealer part. Try DodgeParts.com Search for DORMAN Part # 902302. Be warned that you need to remove the intake manifold to get at the two inboard mounting bolts to replace this part. It's

...Sebring. Thanks, but what I really needed to know is if the intake manifold and all the other parts that eneded to com off to replace 3 of the spark plugs need to be removed to do the cap and rotor ...

...sebring conv. 2.7L Fig. Intake manifold bolt torque sequence 2.7L engine Upper intake manifold with a new gasket on the lower intake manifold and torque the bolts, in sequence, to: 105 inch lbs. (12 ...

...INTAKE MANIFOLD BOLTS ON A 2001 CHRYSLER SEBRING 3.0L ENGINE Sorry first attempt got sent by accident Upper intake manifold bolts/nuts 168 in-lbs Lower intake manifold nuts are done in 4 steps Step1. ...

...Sebring conv. I had to replace the engine so I need all of them. Thanks. What engine size, 2.7L or 3.0L, and torque about what component (cylinder head, intake-exhaust manifold, etc). If you buy a ...

...sebring 2000 2.5 liter engine coup convertible. According to Chilton's the torque settings for the intake manifold are 168 in lbs. That just sounds way too high. Am I missing something? I was ...

...intake plenum to get at one of the bolts that hols it in place. Its not that big of a deal to remove. Just remember to replace the plenum gasket and torque the bolts to the proper spec. If you have ...

...sebring touring 2.4l repair manual? This manual doesnt seem to exist. I've searched everywhere! Does any have it or know where to get it? I am working on the intake manifold and need the ...

in need the torque for the bolts to the plenum the bolts that go into the plenum to the lower intake theres 7 bolts and they need to be torqued intake manifold upper and lower 89 in. lbs.

...FOR THE INTAKE MANIFOLD BOLTS ON A 2009 CHRYSLER SEBRING 2.4L ENGINE Tighten them snug, and then a little more. https://www.google.com/search?q=2009+CHRYSLER+SEBRING+INTAKE+MANIFOLD+BOLTS+torque