Questions & Answers for: sebo automatic x4

sebo automatic x4 power cuts out, bag not full, filters replaced Could have a problem with the cord or maybe the switch. The swivel neck has wires runing from where the want plugs into and plugs into ...

SEBO X4 flex had to have the fex shortened because the cable sheathing had come out of the internal gripper and there was a couple of inches of two strand wire hanging out the cable entry point before

automatic height-adjust feature, the Sebo X4 has two drive belts, one from the motor to the height-adjust sensor, and another from that sensor to the brush roller. To access them,first remove the base

...sebo X4 extra, the bag full clog light keeps coming on. There are no clogs in any parts and it has full suction. Machine automaticly shuts off after 30 seconds with the full bag/clog light lit very ...

...Sebo automatically adjusts its brush height according to the type of floor it's on. At the correct brush height, on carpet, the machine should almost pull itself forwards. If this is not happening, ...

...Sebo automatic X4 extra. It sometimes stays at max height. The servo motor has been replaced without producing a cure. The "UP" and "DOWN" lights do not light when the fault is present. Does this ...

Sebo X4 Extra brush light remains on despite changing brush, any solutions? Sorry you've had to wait so long for a reply. Perhaps you no longer need help, but here goes anyway. Must confess I'm not ...

...easily with only a phillips head screwdriver.I have included a link to the parts list for this machine. We do stock both parts. ...

...If your vacuum is under warranty, this would likely be covered. I have included a link to the parts list for your reference. ...