Questions & Answers for: seat belt light stays buckled

seat belt light keeps staying on when i put my seat belt on the light stays on. There is a sensor that makes a connection when the seat belt is buckled, that turn out the light, it is defective, ...

...seat won't work - they won't buckle I have two children and only one working belt I can't do that. Please any suggestions? Are they possibly frozen or need wd-40 or is it possibly a part or spring? ...

...seat belt light comes on every now and again If the seat belt light comes on intermittently with the belt buckled, it may have a bad switch in the buckle or a loose connection @ the switch. This may ...

...seat belt light stays on. My seat belt light stays on in my BMW Z4. Is there a solution to this. The contact in your seat belt buckle needs cleaned, (when you click the belt into the buckle the ...

...SEAT BELT ANY WAY YOU NEED TO HAVE SOME ONE READ THE CODE FOR YOU HOPE THIS HELPS Here's a quick check list for most common cost of SRS / Air bag problem. Dirty contacts on driver and passenger seat ...

...seat belt buckle. seat belts and all buckles are under a lifetime warr at all honda dealers. take it to a honda dealer to have the code checked out. if its a 9-3 or 9-4 or any seat belt, or seat belt ...

...seat belt and air bag light stay on in my 2002Jeep Cherokee. The mechanic says the problem is the drivers side seat belt buckle. Is he correct? He would have run a diagnostic scan of the system to ...

seat belt my seatbelt will not buckle unless I push down the button and put the seatbelt in at the same time. My seatbelt alarm also does not go off even when the seatbelts are buckled. thank you Have

seat belt light stays Why Does the passenger seatbelt stays on Pull on the belts out a few times & see if the light goes off if seat bealt is buckle, is the seat belt light stay on ? Is there ...

...when buckle to stop alarm . I would cut the two wires going to the seat belt buckle and twist them together. sounds like it needs a new buckle anyway so cutting the wires isn't going to ruin ...