Questions & Answers for: seagate jumper

...Jumper settings for Seagate ATA/IDE Internal drives <20gb & greater For older/smaller drives visit www.seagate.com that is right i had the same prob but as soon as i put the jumper in the master got ...

...jumper. http://www.seagate.com/ww/v/index.jsp?vgnextoid=63557ea70fafd010VgnVCM100000dd04090aRCRD&locale=en-US Try removing the jumper. Check if bios see's the drive. Most motherboards that do not ...

...jumper settings link: http://www.seagate.com/images/support/en/us/mxo_ata_jumpers.gif Second link: http://www.seagate.com/staticfiles/images/support/en/us/mxo_ata_jumpers_rev.jpg Basic jumper setting ...

WD drive won't work as master when Seagate 80GB drive connected as slave. New WD1600AAJB as master - works fine alone. I want to use Seagate 80GB as slave. Won't go. Computer stalls on start up. Both ...

jumper position for master setting on a Seagate 7200.9 Which of the eight pins does the jumper go on for the master setting. Hello hoffies2, These links should help you out. ...

...seagate.com/staticfiles/maxtor/en_us/documentation/manuals/dm_plus_60_ultra_ata_manual.pdf The Jumper Settings are in Chapter 2, Page 5 (2-5) Looking at the page number for the PDF file it's on Page ...

...Jumper settings Here's a link to them on the Seagate site... (Seagate acquired Maxtor) http://www.seagate.com/staticfiles/images/support/en/us/mxo_ata_jumpers_rev.jpg All Maxtor hard disks has a ...

jumper setting for slave drive ide If the drive is the Seagate Baracuda series, then simply remove all the jumpers from 8-pin jumper block and it will be a Slave drive. If you want any other settings,

jumper on the seagate? and when i try to clone it says unable to lock volume on the seagate is the jumper the issue?? are you trying to do this using while using your os? if so i would try downloading

Jumper settings for Seagate and Maxtor IDE (ATA) harddrives, http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=196299&NewLang=en Follow the chart examples under the second heading