Questions & Answers for: sd card icon lock

...APPEAR. I CANT TAKE SHOTS. the camera card may be in the "lock" possition, if its an SD card take it out check this, if you have no SD card check the camera's menu regards and don't forget to rate ...

media card 4gb and i cannot get it to load off of my computer. There should be a slide switch. On this switch you will see a lock and unlock icon on the SD stick. Just switch the swithc to unlock icon

...sd card i get a "card locked" . How do i unlock card to record? turn off the camcorder, remove the SD card. Look along the edge, perhaps the end, and you should see a little slide switch. Move it to ...

...SD card instead of the internal memory. I checked to make sure the SD card is on the approved list. Is it locked? There is a lock on the side of the SD card. it is a sliding piece of plastic. Hi. I ...

...sd card. when I click computer / format/ hit erase it tells me it's write protected. what do I need to do SD cards usually have a microswitch on them with two positions Locked and Unlocked. Depending ...

...sd card icon with a lock in it It won't let me take any videos and photos and all it shows is a icon with a small lock inside of it. How to fix this problem? It means you switched of the SD card ...

...SD cards, there is a small slide-lock on the side of card. Move the slide away from the LOCK icon, re-insert the card in the camera, being careful not to cause the slide to move again, and you should ...

...sd card so i can start over . can this be done Use the Trash Can icon on the camera After you have copied the files from your camera to your computer: Navigate to the camera's SETTINGS/SETUP mode ...

...SD card on my Wolverine fd Mighty, and the "processing" icon twirls around -- but no image shows up on the actual SD card. Wolverine fd Mighty what is that.? sold 2014? new Ok so this is a pure hard ...

...SD card but not with my new 2GB SD card just got new 2Gb sd card and it gives me a memory error message and then tells me it is locked but ive unlocked and locked the card and still doesnt work but ...