...wife does this every time she replaces the bobbin.... just take it out and clean the bobbin case and the fixed metal hook race with a small brush to remove lint. If there is a significant amount of ...
...model but aren't sure what a "shukle" is in the solution you posted. Nothing looks broken and all screws seem tight. Any suggestions? Greetings from Canada!! Richard IF EVERYTHING LOOKS GOOD, ONE ...
...wife has been using a EuroPro steam ironing unit, model EP8000, ser # AE ZZ 00035471 for a number of years and it just stopped working. I would like to take it apart but it has a very strange screw ...
Question about 373 Mechanical Sewing Machine
...wife does this every time she replaces the bobbin.... just take it out and clean the bobbin case and the fixed metal hook race with a small brush to remove lint. If there is a significant amount of ...
Question about Shark Steam Mop - Gray/ Purple Vacuum
...months later and enough nagging from my wife, I finally delved into it. I removed the housing screws from the back side (about 8 small recessed screws). After some wrestling with the housing to ...
...replaced my wife's iron corn, as it was fraid in one spot. It was an easy job, i just undid the screws, open up the handle part of the iron, and replace the cord. So yes, if you really like that ...
Question about Shark Steam Mop - Gray/ Purple Vacuum
...the same... So, first look right inside and check that out, then if that is okay, take out the four screws that hold the swivel into the head...then you can take out the last two screws holding the ...
...that plugged. Anyway, after that, I reassembled and it works fine. By the way, removing the casing screws was a lot of fun
...will have to use distilled water if you want the unit to work for any period of time. The casing screws were a real pain to remove, so take your
...wife changed the oil , appaerntly she did slide the control unit back into the fryer body all the way , there is a switch inside the slot on the control unit, when properly put back together and slid ...
Usually answered in minutes!
132 Questions
105 Questions
58 Questions
66 Questions
64 Questions