Questions & Answers for: screw heads Vacuums

Ad

Question about 22812 Bagged Canister Vacuum

3 Answers

...seized. Can the brush be removed? Yes. Remove the top plate on the power head. Remove the two screws. Flip the power head over. Insert a flat head screw driver into each of the marked slots and ...

Ad

Question about 8910 ProHeat Clear View Upright Vacuum

1 Answer

screws on bissel carpet cleaner what do you call the type of scewdiver need to remove special headed scews that hold panel on in front of soap pump.thanks geoff. ps where can i get one from? Don't ...

Ad

Question about 8910 ProHeat Clear View Upright Vacuum

1 Answer

Need to replace belt on Eureka Powerline 12.0 vac. Screws look like Torx head or something on bottom of vac. Are those the screws that need to come out for changing? If so, what size do I need? No, do

Question about Altima Upright Vacuum Model 2996AVS Vacuum

2 Answers

...for plate removal... Thanks jim nash jnash4@nycap.rr.com Hi Jim You should find the cross head screws on top of the hood - look below the duster and there should be a screw there, also another ...

Question about Altima Upright Vacuum Model 2996AVS Vacuum

2 Answers

...to the motor I need to take the top off the motor of a Genie 300PH wet/dry vacuum. there are four screws; two are phillips head and the other two are different. How do I get the two different

Question about 23612 Progressive PowerMate Bagged Canister Vacuum

1 Answer

How do you open up the power head to check the belt? Turn the power head over so the bottom is facing up. On the bottom towards the back there are two holes (one on each side) where you can get to the

Question about 23612 Progressive PowerMate Bagged Canister Vacuum

1 Answer

...belt somewhere. shark v1510 How do I replace the belt? remove the outside sliding cover... remove 2 screw in from of housing, and also the screw holding the wheel on the brush head cap side of the ...

Question about 23913 Progressive PowerMate Bagged Canister Vacuum

1 Answer

I think the belt is off or broken in the cleaning head, but need to get it apart and don't know how It appears to be the same cleaning head on my model # 116, if so, there are two phillips screws ...

Question about 23913 Progressive PowerMate Bagged Canister Vacuum

1 Answer

...working so I took apart and cleaned all hair out of every where and is working fine now but the screwes are in but are striped on there heads. I would like to get new screws if possible? I will

Question about 23913 Progressive PowerMate Bagged Canister Vacuum

1 Answer

how do i get my sweeper apart to change the belt Usually there are screws at the bottom of the sweepers brush head and further back like a cover. look for these screws. Most belt driven vacuums have ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...