Questions & Answers for: Rowenta screw heads Photography

Ad

Question about Professional DX8800 Iron

5 Answers

Rowenta Iron Do you know where I can locate a "screwdriver" to take this iron apart? There is a short in the cord. thanks Special screw called "Torx tamper proof" call 925 8271011 and order "Rowenta ...

Ad

Question about DX-8800 Iron

2 Answers

Replace power cord On the back-end of the iron, two screws need to be removed so I can gain access to the cord terminals so I can replace the cord. The screws have a star-shaped head with a small ...

Ad

Question about DX6700 Iron

1 Answer

Rowenta Iron Problems Hello! My iron doesn't want to turn on when I want to iron. I think it has something to do with the automatic on and off mechanism. If I shake it or turn it upside down, it will ...

Question about Steam Generator DG050 Iron

1 Answer

Screwdriver I need to reattach the hose from the base of the steamer to the iron. I can't find a screwdriver that will fit the base so I can open it. it is probably a "tamper-proof' Torx head screw ...

Question about Powerglide DM273 Iron

1 Answer

2 screws on bottom of iron are rusted Two screws on the bottom of my DM273 Rowenta iron are rusted. When I use the steam setting and set my iron up, the screws get moisture on them and then when I ...

Question about Powerglide DM273 Iron

1 Answer

...screw heads on bottom appear to be special tool, therefore can't look inside. Suggestions? I drilled out the nubs in the center of the screws. removed the screws, and took off the back plate. The ...

Question about Commercial Garment Steamer - White

10 Answers

...boiler unit. Opening the case is tricky and requires a sequence. 1) Take the wheels off 2) find 3 screws total that hold the black shroud parts. The shroud pieces come off with a little bit of ...

Question about Powerglide DM273 Iron

1 Answer

Screw on back of iron is loose. standard allen wrench doesn't fit. Probably what they call a torx head. If it has a tip in the center then it will be a security torx head. sets of torx head wrenches ...

Question about IS9100 1550W Precision Valet Commercial Garment Steamer w/ Retractable Cord

2 Answers

...uprights by unlocking the tabs on the bottom of the unit; 2. Using a long Phillips Head remove the screw in the bottom front center of the base; 3. Remove the screws from the inside of the Accessory ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...